Getting Claim Costs Under Control: Improve Your Loss Ratio Using These Proven Fundamentals
By: Michael T. Murdock (Claims Journal) March 2016
The property/casualty industry is undergoing significant challenges with increased claim severity in liability and physical damage claims. These increases are outpacing inflation and rate adequacy. According to the Insurance Information Institute, in 2009 the average private passenger auto bodily injury claim was $13,891. In 2014, that average grew to $16,640 – an increase of almost 20 percent. The private passenger auto collision loss ratio has risen from 67.7 percent in 2010 to 78.3 percent in 2015 – a 16 percent increase. The loss ratio can be adversely impacted by claim handling, underwriting and rate inadequacy with claim leakage as a primary cause of loss ratio deterioration.
Although the severity trend is indeed a challenge, the good news is a quality-driven claim organization can take action to do something about it.
Back to Basics
A quality-driven claim organization can improve the loss ratio by up to 4 points by getting back to basics – in other words, focusing on best practice technical and supervisory tactics which have a direct or indirect impact on the loss ratio. These tactics include applying fundamental claim skills in investigation, evaluation and negotiations including comparative negligence; staffing and workload management; and implementing comprehensive quality review processes.
Fundamental Claim Skills & Comparative Negligence
Placing too much emphasis on closure ratios can lead to overpayment of claims, thus increased severity. Claim personnel must be thoroughly trained and be effective in liability and damage evaluation to properly evaluate bodily injury claims – understanding both objective (medical & wage claims) and subjective (pain & suffering) components in the evaluation process.
Understanding the impact of Comparative Negligence and applying it properly to liability claims (BI & PD) at the evaluation stage will improve results – reserves, authority reviews and dispositions. There are three negligence doctrines which vary by state: Pure Comparative, Modified Comparative and Contributory Negligence – these doctrines indicate recovery for damages will be reduced by the percentage of fault attributable to each party. Under the Pure Comparative rule, a party can collect for damages even if they are 99 percent at fault. Most states have adopted the Modified Comparative rule which has two variations: the 50 percent rule and the 51 percent rule – meaning if you are 50 percent or 51 percent negligent you will be barred from recovery. With the Contributory Negligence rule, injured parties may not collect damages if they are only 1 percent responsible for the accident.
We find that adjusters working in various jurisdictions are not always applying comparative negligence properly. Appropriately applying 15 to 20 percent of negligence on the adverse party will impact the loss ratio (for example, an insured making a left turn in front of the adverse vehicle) versus paying 100 percent to avoid confrontation with the claimant. If the adverse party is over 51 percent liable for the accident in a modified comparative negligence jurisdiction, the claim should be denied. If the adverse party is liable for the accident in a contributory negligence jurisdiction, a claim denial may be in order.
Staffing & Workload Management
There is a direct correlation with adjuster workloads and positive claim outcomes. The higher the workload, the less time to conduct proper claim investigations (e.g., statements and photos), prepare quality damage appraisals, evaluate and negotiate claims effectively, provide good customer service and properly manage reserves. A best practice is to conduct quarterly staffing analyses to evaluate workloads and trends. The best claim organizations have manageable caseloads with established workload ranges for claim personnel by exposures (not claim files).
Span of control has a significant impact on a claim supervisor or manager’s ability to provide substantive and high-quality claim supervision. If the span of control is higher than six adjusters to one supervisor, quality is likely to suffer.
Quality Review & Re-inspection Programs
Claim organizations require an effective claim audit process to properly evaluate claim trends at the adjuster, claim unit, office and company level. A comprehensive Quality Claim Review (Audit) Program using best practice categories (e.g., Contacts, Coverage, Investigation, Documentation, Evaluation, Disposition, File Development, Litigation Management, Expense Control, Recovery and Supervision) should be a core function in every claim operation. The process should be supported by technology and be able to trend data at a very granular level using intuitive analytical tools. This data can then be used as a basis for training and development.
An effective Re-inspection Program for auto physical damage and property damage claims is essential to manage Auto Property Damage/Property Damage (and rental) costs. It doesn’t take much of a dollar impact per claim to deteriorate a loss ratio.
Take Action
We recommend conducting an objective review of your claim organization to evaluate areas for improvement. Consider rating your claim organization in the following areas:
– Best practice claims handling and supervision;
– Liability and damage evaluation;
– Applying comparative negligence;
– Workload and span of control;
– Audit and re-inspection;
– Training.
You will find opportunities to reverse the increased severity trend by optimizing these important fundamentals in your organization.
Categories
- Benefits Resources
- Bonding
- BOP
- Business Insurance
- Commercial Auto
- Commercial Property
- Company News
- Construction
- Crime Insurance
- Cyber Insurance
- Directors & Officers
- Employee Benefits
- Employment Practice Liability Insurance
- Entertainment
- General Liability
- Health Insurance
- Healthcare
- Healthcare Reform
- Homeowners Insurance
- Hospitality
- Manufacturing
- Medical Malpractice
- Mining & Energy
- Nightclubs
- Personal Auto
- Personal Insurance
- Professional
- Restaurants
- Retail & Wholesale
- Risk Management Resources
- Safety Topics
- SBA Bonds
- Security
- Seminars
- Technology
- Tourism
- Transportation
- Uncategorized
- Workers Compensation
Archives
- May 2021
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- November 2018
- September 2018
- August 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- February 2013
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- March 2011
- November 2010
- October 2010
- September 2010
- April 2010
- February 2010
- November 2009
- October 2009
- November 2008
- August 2008